Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 19^th, 2024, 1:45pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Simulators › RF Simulators › Interpretation of Minimal value in LSB-Noise of Crystal Oscillator

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Interpretation of Minimal value in LSB-Noise of Crystal Oscillator (Read 2382 times)

pancho_hideboo Senior Fellow Offline Posts: 1424 Real Homeless	Interpretation of Minimal value in LSB-Noise of Crystal Oscillator Jul 28^th, 2010, 6:17am I simulated phase noises of simple crystal oscillator. Here there is a minimal only in LSB-Noise. Is this minimal value of LSB-Noise physically reasonable ? If so, how should I interpret this minimal mechanism ?
Back to top	XtalOsc1.png Kita━━━━━━(ﾟ∀ﾟ)━━━━━━ !!!!! http://www7.plala.or.jp/ungeromeppa/flash/kita.html http://www.youtube.com/watch?v=mjIxGh55bMM&feature=related IP Logged

pancho_hideboo Senior Fellow Offline Posts: 1424 Real Homeless	Re: Interpretation of Minimal value in LSB-Noise of Crystal Oscillator Reply #1 - Jul 28^th, 2010, 6:22am I confirmed PM, AM, LSB and USB Noises using Agilent GoldenGate(HB), Agilent ADSsim(HB) and Cadence Spectre(Shooting-Newton). They all give almost same results.
Back to top	XtalOsc2.png « Last Edit: Jul 28^th, 2010, 8:01am by pancho_hideboo » Kita━━━━━━(ﾟ∀ﾟ)━━━━━━ !!!!! http://www7.plala.or.jp/ungeromeppa/flash/kita.html http://www.youtube.com/watch?v=mjIxGh55bMM&feature=related IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.