The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 19th, 2024, 7:56am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › DAC input full-scale range in #of bit
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
DAC input full-scale range in #of bit (Read 717 times)
polyam
Community Member
***
Offline



Posts: 78
DAC input full-scale range in #of bit
Nov 12th, 2018, 6:39pm  
Hi,

I am designing a delta-sigma DAC in SIMULINK. I was wondering how to input 24-bit sine wave.
How is the input full-scale range in voltage related to the 24-bit sine wave?
Assume that VDD=3.3 and DAC resolution is 24-bit.

Thanks
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.