The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 24th, 2024, 8:33am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design Languages › Verilog-AMS › JK Flip flop with reset (Verilog A)
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
JK Flip flop with reset (Verilog A) (Read 2016 times)
manos_electronics
New Member
*
Offline



Posts: 1
JK Flip flop with reset (Verilog A)
Oct 27th, 2016, 5:38am  
Hello! I want to ask for some help! I need to make a JK Flip flop with a reset input, can anyone help me with the VerilogA code?
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1998
Massachusetts, USA
Re: JK Flip flop with reset (Verilog A)
Reply #1 - Oct 27th, 2016, 8:52am  
You could start with the flip-flop examples on this site ( click Verilog-AMS on the menu bar or go to http://www.designers-guide.org/VerilogAMS/ )
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.