The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 20th, 2024, 6:39am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › gnucap voltage controlled elements
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
gnucap voltage controlled elements (Read 1087 times)
kiltanen
New Member
*
Offline



Posts: 5
gnucap voltage controlled elements
Oct 15th, 2016, 10:47am  
What is correct syntax for the expression of voltage controlled current source in gnucap 0.35. Does gnucap even support non-linear vccs? Can vccs with two controlling voltages realized, if so how?
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.