The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 29th, 2024, 3:11am
Pages: 1
Send Topic Print
Parasitic extraction of a metal square in cmos process (Read 2452 times)
mixed_signal
Senior Member
****
Offline



Posts: 183

Parasitic extraction of a metal square in cmos process
Mar 21st, 2016, 3:08pm
 
Hi, I want to find the parasitic of a metal square of given area in a cmos process (tsmc65nm) using regular lvs, xrc flow. But i do not have a schematic for this metal for lvs, xrc.

Some people suggest about using lvsres. But I do not know if it exists for tsmc65nm process. If it exists then what is layout and schematic name for M9?
Back to top
 
 
View Profile   IP Logged
raja.cedt
Senior Fellow
******
Offline



Posts: 1516
Germany
Re: Parasitic extraction of a metal square in cmos process
Reply #1 - Mar 21st, 2016, 4:49pm
 
Hi Use a metal resister in the middle of metal and attach pins. This should clear your LVS now.
Back to top
 
 
View Profile WWW raja.sekhar86   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.