The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 28th, 2024, 10:50pm
Pages: 1
Send Topic Print
ncsim is hogging 3 copies of Virtuoso_Multi_mode_Simulation license (Read 1158 times)
John Corn
New Member
*
Offline



Posts: 2

ncsim is hogging 3 copies of Virtuoso_Multi_mode_Simulation license
Feb 15th, 2016, 10:15am
 
Hi everyone,

I'm using ncsim for a Verilog-AMS testbench and it appears to require 3 copies of the Virtuoso_Multi_mode_Simulation license to start, then it un-checks out one and finishes with two. It seems kind of odd that one simulation would require three licenses, so a coworker suggested that the software might not be properly configured. Is this supposed to happen?

My problem can be reproduced with the code at http://www.designers-guide.com/newsletters/0711/

Thanks!

John
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.