The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 25th, 2024, 2:05pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › High-Power Design › nwell connection of HV MOM capacitor (cfmom) in TSMC 0.18 HV BCD process
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
nwell connection of HV MOM capacitor (cfmom) in TSMC 0.18 HV BCD process (Read 4684 times)
xlowen
New Member
*
Offline



Posts: 9
Delft, Netherlands
nwell connection of HV MOM capacitor (cfmom) in TSMC 0.18 HV BCD process
Aug 25th, 2015, 7:20am  
Hi All,

In the pdk of the HV MOM capacitor(cfmom) in tsmc 0.18 BCD process, I cannot find any connection to the nwell. Do I need to make some nwell contact by myself or leave it floating?

Thanks,
xlowen
Back to top
 
 
View Profile   IP Logged
Tako
Community Member
***
Offline



Posts: 83
Re: nwell connection of HV MOM capacitor (cfmom) in TSMC 0.18 HV BCD process
Reply #1 - Aug 26th, 2015, 5:08am  
If HV MOM layout has n-well it should be biased somehow. I think you should ask this question directly to the foundry.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.