The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Mar 28th, 2024, 12:16pm
Pages: 1
Send Topic Print
Implementation and Discussion: BSIM3 CV Parameter Extraction (Read 3363 times)
ohenri100
New Member
*
Offline



Posts: 2
vietnam
Implementation and Discussion: BSIM3 CV Parameter Extraction
Jul 17th, 2015, 9:11am
 
Hi all,

I'm working to extraction the BSIM3v3 CV Parameter. I create this topic to sharing, discussion, studying for new man. (I'm a new man) Tongue

My task: Extract all CV parameters in BSIM3v3 Model using Levenberg-Marquardt Algorithm.

I study the Flow for Extraction but it is very hard for new man; Therefore, I do it step by step:

Step 1. Extraction TOX from Cgg - Vgs curve.
Result:


Step 2. Extract Vth for CV
Hidden.

Step 3. Extract: DLC, CF, CGSO, CGSL, C_KAPPA  from Overlap Cap  Cgs vs. Vgs .
Result:


In this step 3, as flow we need to extract DLC and CF.
My post and my work are stop this here. I need every share your experience, your  advice,... about this method and this flow.
I hope they have good stuff for them next post.

I need and I want to discuss to improve my work.

Thank you.
Back to top
 
 
View Profile   IP Logged
ohenri100
New Member
*
Offline



Posts: 2
vietnam
Demo: Implementation and Discussion: BSIM3 CV Parameter Extraction
Reply #1 - Oct 21st, 2015, 12:34am
 
Dear all

I show a demo full BSIM3v3 Capacitance extraction in my work.

Regard.
Back to top
 
View Profile   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.