Designer’s Guide Community

Pages: 1

AMS model for simple nmos (Read 3050 times)

amruta New Member Offline Posts: 6	AMS model for simple nmos Mar 31^st, 2015, 3:07pm Hello , can anyone point me to a simple verilog ams model for an nmos transistor? Thank you, Amruta
Back to top	IP Logged

Geoffrey_Coram

Senior Fellow

Offline

Posts: 1998
Massachusetts, USA

Re: AMS model for simple nmos
Reply #1 - Apr 13^th, 2015, 10:15am

Silvaco used to have MOS level=1 available on their web site; I haven't looked recently. The PSP model is available, but it's not a "simple" model.

What do you want to do with this model? I recall the EKV developers released a Verilog-A version of the dc part of their model (no charge/capacitance), which could be useful for instruction, but not for actual simulation.

If at first you do succeed, STOP, raise your standards, and stop wasting your time.

IP Logged

amruta New Member Offline Posts: 6	Re: AMS model for simple nmos Reply #2 - Apr 13^th, 2015, 10:36am Geoffrey, I need a simple nmos model to create a current mirror source for pulling a load current of around 200mA and connect it to the Output of an LDO. Regards, Amruta
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›