The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 23rd, 2024, 2:52pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › SAR adc simulation time
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
SAR adc simulation time (Read 2230 times)
kunal
New Member
*
Offline



Posts: 1
SAR adc simulation time
Sep 25th, 2014, 12:32pm  
In  single ended IDEAL SAR ADC  the simulation is stuck at 4% for sinusoidal input and the comparator is not able to resolve the value . i run the simulation in conservative mode . and in moderate mode it is resolving the value. i believe the comparator is not able to resolve . if you want the files i can attach
thank you Smiley
Back to top
 
 
View Profile   IP Logged
loose-electron
Senior Fellow
******
Offline

Best Design Tool =
Capable Designers

Posts: 1638
San Diego California
Re: SAR adc simulation time
Reply #1 - Sep 25th, 2014, 3:50pm  
and your question is?
Back to top
 
 
Jerry Twomey
www.effectiveelectrons.com
Read My Electronic Design Column Here
Contract IC-PCB-System Design - Analog, Mixed Signal, RF & Medical
View Profile WWW   IP Logged
eternity
Junior Member
**
Offline



Posts: 28
Re: SAR adc simulation time
Reply #2 - Sep 30th, 2014, 7:13am  
I second loose-electron's question..
Please specify the query.

Eternity
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.