The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 24th, 2024, 8:32pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › Circuit Simulators › how to selectively turn off transistor noise in hspice .noise sim
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
how to selectively turn off transistor noise in hspice .noise sim (Read 1847 times)
neoflash
Community Fellow
*****
Offline

Mixed-Signal
Designer

Posts: 397
how to selectively turn off transistor noise in hspice .noise sim
Jul 27th, 2014, 6:45pm  
I can turn off resistor noise by setting "noise=0". Is there any switch for mos transistor to turn off noise?

Thanks.

Neo
Back to top
 
 
View Profile   IP Logged
Geoffrey_Coram
Senior Fellow
******
Offline



Posts: 1998
Massachusetts, USA
Re: how to selectively turn off transistor noise in hspice .noise sim
Reply #1 - Jul 31st, 2014, 1:55pm  
I'm not aware of an easy way to do it in HSpice.
Back to top
 
 
If at first you do succeed, STOP, raise your standards, and stop wasting your time.
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.