The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 18th, 2024, 1:25am
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Design › Analog Design › Brokaw bandgap reference problem
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Brokaw bandgap reference problem (Read 2058 times)
RyanLin
New Member
*
Offline



Posts: 1
Taiwan
Brokaw bandgap reference problem
Apr 23rd, 2014, 7:01pm  
Hi all

Pls help me to analysis the RX result, which is in the attached photo.Thanks.


WHY RX=(R3/R4 X R11) / R12
Back to top
snap.jpg  
 
snap.jpg
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.