The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 17th, 2024, 6:04pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Measurements › RF Measurements › measure Zin of an cascode LNA from S parameters
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
measure Zin of an cascode LNA from S parameters (Read 2916 times)
baab
Senior Member
****
Offline



Posts: 178
EA
measure Zin of an cascode LNA from S parameters
Mar 09th, 2014, 7:33pm  
I want to measure Zin of an cascode LNA using Cadence.
I am wondering if this is correct.
1. Measure S - parameters
2. Convert S to Z parameters
3. Zin = Z11 from the result above

I know that Zin is not Z11 in ZP analysis, though.
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.