Designer’s Guide Community

‹ Previous topic | Next topic ›

Pages: 1

Measure total determinisitic jitter in Calculator (Read 3676 times)

ywguo

Community Fellow

Offline

Posts: 943
Shanghai, PRC

Measure total determinisitic jitter in Calculator
Dec 24^th, 2010, 5:25am

Hi Guy,

Is there any function in calculator that can be used to measure total deterministic jitter? To measure the total jitter, including DCD and ISI, a random serial data is applied in the test bench. The period_jitter function is define as Returns a waveform representing the deviation from the average period. It is fine to measure the jitter of a clock, but not for a random serial data. Any comments are appreciated.

Yawei

IP Logged

Andrew Beckett

Senior Fellow

Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK

Re: Measure total determinisitic jitter in Calculator
Reply #1 - Jan 2^nd, 2011, 2:19am

Hi Yawei,

You may find this function (abEyeCross) useful for this:

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNu...

Other relevant/related solutions:

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNu...

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:ViewSolution;solutionNu...

Best Regards,

Andrew.

IP Logged

ywguo Community Fellow Offline Posts: 943 Shanghai, PRC	Re: Measure total determinisitic jitter in Calculator Reply #2 - Jan 18^th, 2011, 5:45pm Thank you very much, Andrew.
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›