The Designer's Guide Community
Forum
ForumVerilog-AMSAnalysisModelingDesignTheory
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
May 13th, 2024, 3:42pm
 
  HomeHelpSearchLoginRegisterPM to admin    
The Designer's Guide Community Forum › Simulators › RF Simulators › Using spectre??
‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Using spectre?? (Read 3618 times)
david
New Member
*
Offline



Posts: 8
Using spectre??
Mar 17th, 2009, 5:40am  
hello !!
I am a new bee to cadence tools. Anyone please tell me how to do transient, ac analysis of a differntial amplifier i.e how to connect sources to its inputs, what should be its simulation setup?? How to do above analysis in spectre.
Back to top
 
 
View Profile   IP Logged
oermens
Community Member
***
Offline



Posts: 86
Re: Using spectre??
Reply #1 - Mar 17th, 2009, 8:05am  
did you consider reading the documentation that comes with cadence IC and MMSIM?

/<path_to>/IC/doc
/<path_to>/MMSIM/doc

in terminal type 'spectre -h' for help
Back to top
 
 
View Profile   IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›
« Home ‹ Board
The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.