The Designer's Guide Community
Forum
Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.
Apr 19th, 2024, 1:36pm
Pages: 1
Send Topic Print
How to import a spice netlist to schematic (Read 1407 times)
Tommy
Junior Member
**
Offline



Posts: 19
Tokyo, Japan
How to import a spice netlist to schematic
Jul 18th, 2006, 7:13am
 
How to import a spice netlist to schematic in cadence IC5.1.41?

Thanks
Tom
Back to top
 
 
View Profile   IP Logged
bernd
Senior Member
****
Offline



Posts: 229
Munich/Germany
Re: How to import a spice netlist to schematic
Reply #1 - Jul 18th, 2006, 8:39am
 
The current possible ways are
1. CDL In; Command Interpreter Window (CIW) -> File -> Import -> CDL...
   CDL is a Cadence proprietary format similar to Spice, mainly used for
   the Schematic side for Layout versus Schematic checks.
2. Custom SKILL scripts.

But I recently posted a question to a similar forum which might be of interest
http://www.cdnusers.org/Forums/tabid/52/forumid/59/postid/1983/view/topic/Defaul...
http://www.cdnusers.org/Articles/Download/tabid/188/Default.aspx?title=Spice%20i...

Bernd
Back to top
 
 

Just another lonesome cad guy
View Profile WWW   IP Logged
jbdavid
Community Fellow
*****
Offline



Posts: 378
Silicon Valley
Re: How to import a spice netlist to schematic
Reply #2 - Aug 3rd, 2006, 3:37am
 
If you want to import it to layout you might look at a tool from Accelicon..
probably good enough for floorplanning purposes ..
Back to top
 
 

jbdavid
Mixed Signal Design Verification
View Profile WWW   IP Logged
laker
New Member
*
Offline



Posts: 1

Re: How to import a spice netlist to schematic
Reply #3 - Aug 7th, 2006, 2:56pm
 
You may want to take a look at the Laker-ADP from Silicon Canvas, not only can it import SPICE/CDL/EDIF, it can generate a human readable schematic for further editing.
http://www.sicanvas.com
Back to top
 
 
View Profile   IP Logged
Andrew Beckett
Senior Fellow
******
Offline

Life, don't talk to
me about Life...

Posts: 1742
Bracknell, UK
Re: How to import a spice netlist to schematic
Reply #4 - Aug 20th, 2006, 3:57pm
 
File->Import->CDL can also generate a readable schematic.

In IC610, you'll also be able to import SPICE and spectre netlists (CDL is pretty SPICE-like anyway). See:

There's an article on this on http://www.cdnusers.org but the server is down at the moment so I can't give the exact link.

Regards,

Andrew.
Back to top
 
 
View Profile WWW   IP Logged
Pages: 1
Send Topic Print
Copyright 2002-2024 Designer’s Guide Consulting, Inc. Designer’s Guide® is a registered trademark of Designer’s Guide Consulting, Inc. All rights reserved. Send comments or questions to editor@designers-guide.org. Consider submitting a paper or model.