Designer’s Guide Community :: Forum

Welcome, Guest. Please Login or Register. Please follow the Forum guidelines.

Apr 25^th, 2024, 11:01pm

	HomeHelpSearchLoginRegisterPM to admin

The Designer's Guide Community Forum › Design › Analog Design › can i make use of the Frequency in Cadence?

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

can i make use of the Frequency in Cadence? (Read 6892 times)

cowell Junior Member Offline Posts: 18 World	can i make use of the Frequency in Cadence? Jan 25^th, 2005, 1:04am When we do AC simulation by sweeping frequency, and plot the results, the x-axis is frequency, of course. But is it possible to make use of the frequency data in calsulator, to obtain some results which are related to the frequency? Who can tell me if it is possible?
Back to top	IP Logged

pancho_hideboo Senior Fellow Offline Posts: 1424 Real Homeless	Re: can i make use of the Frequency in Cadence? Reply #1 - Jan 25^th, 2005, 1:54am Use xval() function. PROTOTYPE xval( o_waveform ) => o_waveform/nil DESCRIPTION Returns a waveform whose X vector and Y vector are equal to the input waveform's X vector. EXAMPLE(S) xval( v( "/net8" )) Returns a waveform in which the X vector for the voltage of "/net8" is also used for the Y vector.
Back to top	Kita━━━━━━(ﾟ∀ﾟ)━━━━━━ !!!!! http://www7.plala.or.jp/ungeromeppa/flash/kita.html http://www.youtube.com/watch?v=mjIxGh55bMM&feature=related IP Logged

cowell Junior Member Offline Posts: 18 World	Re: can i make use of the Frequency in Cadence? Reply #2 - Jan 25^th, 2005, 5:30pm Thank u very very much . So great!! :)
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

The Designer's Guide Community Forum » Powered by YaBB 2.2.2!
YaBB © 2000-2008. All Rights Reserved.